 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN6406 N-Channel Silicon MOSFET 2SK2530 Ultrahigh-Speed Switching Applications Features * Low ON-resistance. * Ultrahigh-speed switching. * Low voltage drive. Package Dimensions unit:mm 2083B [2SK2530] 6.5 5.0 4 1.5 2.3 0.5 0.85 0.7 0.8 1.6 5.5 7.0 1.2 7.5 0.6 1 2 3 0.5 2.3 2.3 1 : Gate 2 : Drain 3 : Source 4 : Drain SANYO : TP 2092B [2SK2530] 6.5 5.0 4 2.3 1.5 0.5 5.5 7.0 0.85 1 0.6 0.5 0.8 2 3 2.5 1.2 0 to 0.2 1.2 2.3 2.3 1 : Gate 2 : Drain 3 : Source 4 : Drain SANYO : TP-FA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92500TS (KOTO) TA-2182 No.6406-1/4 2SK2530 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Tc=25C Conditions Ratings 250 30 2 8 1 20 150 -55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta = 25C Parameter Drain-to-Source Breakdown Voltage Gate-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Diode Reverse Recovery Time Symbol V(BR)DSS V(BR)GSS IDSS IGSS VGS(off) | yfs | RDS(on) Ciss Coss Crss td(on) tr td(off) tf VSD trr ID=1mA, VGS=0 IG=100A, VGS=0 VDS=250V, VGS=0 VGS=25V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=1A VGS=10V, ID=1A VDS=20V, f=1MHz VDS=20V, f=1MHz VDS=20V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit IS=2A, VGS=0 IS=2A, di / dt=100A/s 2.0 1.3 1.9 1.5 160 40 15 10 13 80 30 1.0 90 1.5 2.0 Conditions Ratings min 250 30 1.0 10 3.0 typ max Unit V V mA A V S pF pF pF ns ns ns ns V ns Marking : K2530 Switching Time Test Circuit VIN 10V 0V VIN PW=10s D.C.1% VDD=100V ID=1A RL=100 D G VOUT P.G 50 2SK2530 S No.6406-2/4 2SK2530 4.0 3.5 ID -- VDS 8.0 V 6.0 V 6.0 5.5 ID -- VGS VDS=10V .0 V 5.0V 5.0 Drain Current, ID - A Drain Current, ID - A 3.0 2.5 2.0 1.5 1.0 0.5 0 0 1 2 3 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 10 Tc= -25C 25C 75C 4.0V VGS=3.5V 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 Drain-to-Source Voltage, VDS - V 2.8 IT01567 3.2 2.8 Gate-to-Source Voltage, VGS - V IT01568 RDS(on) -- VGS Tc=25C ID=1A RDS(on) -- Tc ID=1A VGS=10V Static Drain-to-Source On-State Resistance, RDS(on) - 2.4 Static Drain-to-Source On-State Resistance, RDS(on) - 2 4 6 8 10 12 14 16 18 20 2.4 2.0 1.6 1.2 0.8 0.4 0 --60 2.0 1.6 1.2 0.8 --40 --20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS - V 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 | yfs | - I D IT01569 Case Temperature, Tc - C 10 7 5 IT01570 IF -- VSD VGS=0 Forward Transfer Admittance, | yfs | - S VDS=10V Forward Current, IF - A Tc= 25 C --25 C C 3 2 1.0 7 5 3 2 0.1 7 5 3 2 75 0.01 0.01 0.01 Drain Current, ID - A 5 7 10 IT01571 1000 0 0.2 0.4 Tc=75 C 25C --25C 0.6 0.8 1.0 1.2 1.4 1.6 Diode Forward Voltage, VSD - V IT01572 1000 3 3 SW Time -- ID VDD=100V VGS=10V Ciss, Coss, Crss -- VDS f=1MHz 7 5 Switching Time, SW Time - ns 100 7 5 3 2 10 7 5 3 2 1.0 0.1 2 3 td(off) tf tr td(on) Ciss, Coss, Crss - pF 3 2 3 2 Ciss 100 7 5 3 2 Coss Crss 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 IT01574 10 5 7 1.0 2 3 5 IT01573 Drain Current, ID - A Drain-to-Source Voltage, VDS - V No.6406-3/4 2SK2530 2 10 7 5 ASO 10s 1.2 PD -- Ta IDP=8A Allowable Power Dissipation, PD - W 5 10 Drain Current, ID - A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 1m ID=2A DC 10 0 s 1.0 s op ms 0.8 era tio n 0.6 Operation in this area is limited by RDS(on). 0.4 0.2 0.01 Tc=25C Single pulse 2 3 5 0 7 10 2 3 5 7 100 2 3 0 20 40 60 80 100 120 140 160 IT01575 1.0 Drain-to-Source Voltage, VDS - V Ambient Temperature, Ta - C IT01788 30 PD -- Tc Allowable Power Dissipation, PD - W 25 20 15 10 5 0 0 20 40 60 80 100 120 140 160 Case Temperature, Tc - C IT01576 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2000. Specifications and information herein are subject to change without notice. PS No.6406-4/4 |
Price & Availability of 2SK2530
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |